Category Archives: Advisories

unrealircd-6.0.2-1.fc35

Read Time:11 Minute, 0 Second

FEDORA-2022-a9349c1299

Packages in this update:

unrealircd-6.0.2-1.fc35

Update description:

UnrealIRCd 6.0.2

UnrealIRCd 6.0.2 comes with several nice feature enhancements along with some fixes. It also includes a fix for a crash bug that can be triggered by ordinary users.

Fixes

Fix crash that can be triggered by regular users if you have any deny dcc blocks in the config or any spamfilters with the d (DCC) target.
Fix infinite hang on “Loading IRCd configuration” if DNS is not working. For example if the 1st DNS server in /etc/resolv.conf is down or refusing requests.
Some MODE server-to-server commands were missing a timestamp at the end, even though this is mandatory for modes coming from a server.
The channeldb module now converts letter extbans to named extbans (e.g. ~a to ~account). Previously it did not, which caused letter extbans to appear in the banlist. Later on, when linking servers, this would cause duplicate entries to appear as well, with both the old and new format. The extbans were still effective though, so this is mostly a visual +b/+e/+I list issue.
Some Extended Server Bans were not working correctly for WEBIRC proxies. In particular, a server ban or exempt (ELINE) on ~country:XX was only checked against the WEBIRC proxy.

Enhancements

Support for logging to a channel. Similar to snomasks but then for channels.
Command line interface changes:
The CLI tool now communicates to the running UnrealIRCd process via a UNIX socket to send commands and retrieve output.
The command unrealircdctl rehash will now show the rehash output, including warnings and errors, and return a proper exit code.
The same for unrealircdctl reloadtls
The command unrealircdctl status to show if UnrealIRCd is running, the version, channel and user count, ..
The command unrealircdctl genlinkblock is now documented and is referred to from the Linking servers tutorial.

New option set::server-notice-show-event which can be set to no to hide the event information (e.g. connect.LOCAL_CLIENT_CONNECT) in server notices. This can be overridden per-oper in the Oper block via oper::server-notice-show-event.
Support for IRC over UNIX sockets (on the same machine), if you specify a file in the listen block instead of an ip/port. This probably won’t be used much, but the option is there. Users will show up with a host of localhost and IP 127.0.0.1 to keep things simple.
The MAP command now shows percentages of users
Add WHO option to search clients by time connected (e.g. WHO <300 t to search for less than 300 seconds)
Rate limiting of MODE nick -x and -t via new vhost-flood option in set::anti-flood block.

Changes

Update Russian help.ru.conf.

Protocol

SVSMODE #chan -b nick will now correctly remove extbans that prevent nick from joining. This fixes a bug where it would remove too much (for ~time) or not remove extbans (most other extbans, e.g. ~account). SVSMODE #chan -b has also been fixed accordingly (remove all bans preventing joins). Note that all these commands do not remove bans that do not affect joins, such as ~quiet or ~text.

UnrealIRCd 6.0.1.1

Fixes

In 6.0.1.1: extended bans were not properly synced between U5 and U6. This caused missing extended bans on the U5 side (MODE was working OK, this only happened when linking servers)
Text extbans did not have any effect (+b ~text:censor:*badword*)
Timed bans were not expiring if all servers on the network were on U6
Channel mode +f could place a timed extban with ~t instead of ~time
Crash when unloading any of the vhoaq modules at runtime
Some log messages being wrong (CHGIDENT, CHGNAME)
Remove confusing high cpu load warning

Enhancements

Error on unknown snomask in set::snomask-on-oper and oper::snomask.
TKL add/remove/expire messages now show [duration: 60m] instead of the [expires: ZZZ GMT] string since that is what people are more interested in and is not affected by time zones. The format in all the 3 notices is also consistent now.

UnrealIRCd 6.0.0

Many thanks (by upstream) to k4be for his help during development, other contributors for their feedback and patches, the people who tested the beta’s and release candidates, translators and everyone else who made this release happen!

Summary

UnrealIRCd 6 comes with a completely redone logging system (with optional JSON support), named extended bans, four new IRCv3 features, geoip support and remote includes support built-in.

Additionally, things are more customizable such as what gets sent to which snomask. All the +vhoaq channel modes are now modular as well, handy for admins who don’t want or need halfops or +q/+a. For WHOIS it is now customizable in detail who gets to see what.

A summary of the features is available at What’s new in UnrealIRCd 6. For complete information, continue reading the release notes below. The sections below contain all the details.

Upgrading from UnrealIRCd 5

When upgrading from UnrealIRCd 5 to 6 then you can use your existing configuration and files. There’s no need to start from scratch. However, you will need to make a few updates, see Upgrading from 5.x to 6.x.

Enhancements

Completely new log system and snomasks overhaul
Both logging and snomask sending is done by a single logging function
Support for JSON logging to disk, instead of the default text format. JSON logging adds lot of detail to log messages and consistently expands things like client with properties like hostname, connected_since, reputation, modes, etc.
The JSON data is also sent to all IRCOps who request the unrealircd.org/json-log capability. The data is then sent in a message-tag called unrealircd.org/json-log. This makes it ideal for client scripts and bots to do automated things.
A new style log { } block is used to map what log messages should be logged to disk, and which ones should be sent to snomasks.
The default logging to snomask configuration is in snomasks.default.conf which everyone should include from unrealircd.conf. That is, unless you wish to completely reconfigure which logging goes to which snomasks yourself, which is also an option now.
See Snomasks on the new snomasks – lots of letters changed!
See FAQ: Converting log { } block on how to change your existing log { } blocks for disk logging.
We now have a consistent log format and log messages can be multiline.
Colors are enabled by default in snomask server notices, these can be disabled via set::server-notice-colors and also in oper::server-notice-colors
Support for logging to a channel. Similar to snomasks but then for channels. Requires UnrealIRCd 6.0.2 or later

Almost all channel modes are modularized
Only the three list modes (+b/+e/+I) are still in the core
The five level modes (+vhoaq) are now also modular. They are all loaded by default but you can blacklist one or more if you don’t want them. For example to disable halfop: blacklist-module chanmodes/halfop;
Support for compiling without PREFIX_AQ has been removed because people often confused it with disabling +a/+q which is something different.

Named extended bans
Extbans now no longer show up with single letters but with names. For example +b ~c:#channel is now +b ~channel:#channel.
Extbans are automatically converted from the old to the new style, both from clients and from/to older UnrealIRCd 5 servers. The auto-conversion also works fine with complex extbans such as +b ~t:5:~q:nick!user@host to +b ~time:5:~quiet:nick!user@host.

New IRCv3 features
MONITOR: an alternative for WATCH to monitor other users (“notify list”).
draft/extended-monitor: extensions for MONITOR, still in draft.
invite-notify: report channel invites to other chanops (or users) in a machine readable way.
setname: notify clients about realname (gecos) changes.

GeoIP lookups can be configured
This shows the country of the user to IRCOps in WHOIS and in the “user connecting” line.
By downstream default, no module is loaded.
Options are the geoip_maxmind and geoip_csv modules.

Configure WHOIS output in a very precise way
You can now decide which fields (e.g. modes, geo, certfp, etc) you want to expose to who (everyone, self, oper).
See set::whois-details for more details.

We now ship with 3 cloaking modules and you need to load 1 explicitly via loadmodule:
cloak_sha256: the recommended module for anyone starting a new network. It uses the SHA256 algorithm under the hood.
cloak_md5: for anyone who is upgrading their network from older UnrealIRCd versions. Use this so your cloaked host bans remain the same.
cloak_none: if you don’t want any cloaking, not even as an option to your users (rare)

Remote includes are now supported everywhere in the config file.
Support for https:// fetching is now always available, even if you don’t compile with libcurl support.
Anywhere an URL is encountered on its own, it will be fetched automatically. This makes it work not only for includes and motd (which was already supported) but also for any other file.
To prevent something from being interpreted as a remote include URL you can use ‘value’ instead of “value”.

Invite notification: set set::normal-user-invite-notification yes; to make chanops receive information about normal users inviting someone to their channel. The name of this setting may change in a later version.
Websocket: you can add a listen::options::websocket::forward 1.2.3.4 option to make unrealircd accept a Forwarded (RFC 7239) header from a reverse proxy connecting from 1.2.3.4 (plans to accept legacy X-Forwarded-For and a proxy password too). This feature is currently experimental.

Changes

TLS cipher and some other information is now visible for remote clients as well, also in [secure: xyz] connect line.
Error messages in remote includes use the url instead of a temporary file
Downgrading from UnrealIRCd 6 is only supported down to 5.2.0 (so not lower like 5.0.x). If this is a problem then make a copy of your db files (e.g.: reputation.db).

Removed

/REHASH -motd and -opermotd are gone, just use /REHASH

Breaking changes

See https://www.unrealircd.org/docs/Upgrading_from_5.x, but in short:

You can use the unrealircd.conf from UnrealIRCd 5, but you need to make a few changes:

You need to add include “snomasks.default.conf”;
You need to load a cloaking module explicitly. Assuming you already have a network then add: loadmodule “cloak_md5”;
The log block(s) need to be updated, use something like:

log {
source {
!debug;
all;
}
destination {
file “ircd.log” { maxsize 100M; }
}
}

Server protocol

When multiple related SJOIN messages are generated for the same channel then we now only send the current channel modes (e.g. +sntk key) in the first SJOIN and not in the other ones as they are unneeded for the immediate followup SJOINs, they waste unnecessary bytes and CPU. Such messages may be generated when syncing a channel that has dozens of users and/or bans/exempts/invexes. Ideally this should not need any changes in other software, since we already supported such messages in the past and code for handling it exists way back to 3.2.x, but you better check to be sure!
If you send PROTOCTL NEXTBANS then you will receive extended bans with Named EXTended BANs instead of letters (e.g.: +b ~account:xyz), otherwise you receive them with letters (e.g.: +b ~a:xyz).
Some ModData of users is (also) communicated in the UID message while syncing using a message tag that only appears in server-to-server traffic, s2s-md/moddataname=value. Thus, data such as operinfo, tls cipher, geoip, certfp, sasl and webirc is communicated at the same time as when a remote connection is added. This makes it that a “connecting from” server notice can include all this information and also so code can make an immediate decission on what to do with the user in hooks. ModData modules need to set mreq.sync = MODDATA_SYNC_EARLY; if they want this. Servers of course need to enable MTAGS in PROTOCTL to see this.
The SLOG command is used to broadcast logging messages. This is done for log::destination remote, as used in doc/conf/snomasks.default.conf, for example for link errors, oper ups, flood messages, etc. It also includes all JSON data in a message tag when PROTOCTL MTAGS is used.
Bounced modes are gone: these were MODEs that started with a & which servers were to act on with reversed logic (add becoming remove and vice versa) and never to send something back to that server. In practice this was almost never used and complicated the code (way) too much.

Client protocol

Extended bans now have names instead of letters. If a client sends the old format with letters (e.g. +b ~a:XYZ) then the server will convert it to the new format with names (e.g.: +b ~account:XYZ)
Support for MONITOR and the other IRCv3 features (see Enhancements)

Read More

unrealircd-6.0.2-1.el7

Read Time:11 Minute, 1 Second

FEDORA-EPEL-2022-fc26d3885c

Packages in this update:

unrealircd-6.0.2-1.el7

Update description:

UnrealIRCd 6.0.2

UnrealIRCd 6.0.2 comes with several nice feature enhancements along with some fixes. It also includes a fix for a crash bug that can be triggered by ordinary users.

Fixes

Fix crash that can be triggered by regular users if you have any deny dcc blocks in the config or any spamfilters with the d (DCC) target.
Fix infinite hang on “Loading IRCd configuration” if DNS is not working. For example if the 1st DNS server in /etc/resolv.conf is down or refusing requests.
Some MODE server-to-server commands were missing a timestamp at the end, even though this is mandatory for modes coming from a server.
The channeldb module now converts letter extbans to named extbans (e.g. ~a to ~account). Previously it did not, which caused letter extbans to appear in the banlist. Later on, when linking servers, this would cause duplicate entries to appear as well, with both the old and new format. The extbans were still effective though, so this is mostly a visual +b/+e/+I list issue.
Some Extended Server Bans were not working correctly for WEBIRC proxies. In particular, a server ban or exempt (ELINE) on ~country:XX was only checked against the WEBIRC proxy.

Enhancements

Support for logging to a channel. Similar to snomasks but then for channels.
Command line interface changes:
The CLI tool now communicates to the running UnrealIRCd process via a UNIX socket to send commands and retrieve output.
The command unrealircdctl rehash will now show the rehash output, including warnings and errors, and return a proper exit code.
The same for unrealircdctl reloadtls
The command unrealircdctl status to show if UnrealIRCd is running, the version, channel and user count, ..
The command unrealircdctl genlinkblock is now documented and is referred to from the Linking servers tutorial.

New option set::server-notice-show-event which can be set to no to hide the event information (e.g. connect.LOCAL_CLIENT_CONNECT) in server notices. This can be overridden per-oper in the Oper block via oper::server-notice-show-event.
Support for IRC over UNIX sockets (on the same machine), if you specify a file in the listen block instead of an ip/port. This probably won’t be used much, but the option is there. Users will show up with a host of localhost and IP 127.0.0.1 to keep things simple.
The MAP command now shows percentages of users
Add WHO option to search clients by time connected (e.g. WHO <300 t to search for less than 300 seconds)
Rate limiting of MODE nick -x and -t via new vhost-flood option in set::anti-flood block.

Changes

Update Russian help.ru.conf.

Protocol

SVSMODE #chan -b nick will now correctly remove extbans that prevent nick from joining. This fixes a bug where it would remove too much (for ~time) or not remove extbans (most other extbans, e.g. ~account). SVSMODE #chan -b has also been fixed accordingly (remove all bans preventing joins). Note that all these commands do not remove bans that do not affect joins, such as ~quiet or ~text.

UnrealIRCd 6.0.1.1

Fixes

In 6.0.1.1: extended bans were not properly synced between U5 and U6. This caused missing extended bans on the U5 side (MODE was working OK, this only happened when linking servers)
Text extbans did not have any effect (+b ~text:censor:*badword*)
Timed bans were not expiring if all servers on the network were on U6
Channel mode +f could place a timed extban with ~t instead of ~time
Crash when unloading any of the vhoaq modules at runtime
Some log messages being wrong (CHGIDENT, CHGNAME)
Remove confusing high cpu load warning

Enhancements

Error on unknown snomask in set::snomask-on-oper and oper::snomask.
TKL add/remove/expire messages now show [duration: 60m] instead of the [expires: ZZZ GMT] string since that is what people are more interested in and is not affected by time zones. The format in all the 3 notices is also consistent now.

UnrealIRCd 6.0.0

Many thanks (by upstream) to k4be for his help during development, other contributors for their feedback and patches, the people who tested the beta’s and release candidates, translators and everyone else who made this release happen!

Summary

UnrealIRCd 6 comes with a completely redone logging system (with optional JSON support), named extended bans, four new IRCv3 features, geoip support and remote includes support built-in.

Additionally, things are more customizable such as what gets sent to which snomask. All the +vhoaq channel modes are now modular as well, handy for admins who don’t want or need halfops or +q/+a. For WHOIS it is now customizable in detail who gets to see what.

A summary of the features is available at What’s new in UnrealIRCd 6. For complete information, continue reading the release notes below. The sections below contain all the details.

Upgrading from UnrealIRCd 5

When upgrading from UnrealIRCd 5 to 6 then you can use your existing configuration and files. There’s no need to start from scratch. However, you will need to make a few updates, see Upgrading from 5.x to 6.x.

Enhancements

Completely new log system and snomasks overhaul
Both logging and snomask sending is done by a single logging function
Support for JSON logging to disk, instead of the default text format. JSON logging adds lot of detail to log messages and consistently expands things like client with properties like hostname, connected_since, reputation, modes, etc.
The JSON data is also sent to all IRCOps who request the unrealircd.org/json-log capability. The data is then sent in a message-tag called unrealircd.org/json-log. This makes it ideal for client scripts and bots to do automated things.
A new style log { } block is used to map what log messages should be logged to disk, and which ones should be sent to snomasks.
The default logging to snomask configuration is in snomasks.default.conf which everyone should include from unrealircd.conf. That is, unless you wish to completely reconfigure which logging goes to which snomasks yourself, which is also an option now.
See Snomasks on the new snomasks – lots of letters changed!
See FAQ: Converting log { } block on how to change your existing log { } blocks for disk logging.
We now have a consistent log format and log messages can be multiline.
Colors are enabled by default in snomask server notices, these can be disabled via set::server-notice-colors and also in oper::server-notice-colors
Support for logging to a channel. Similar to snomasks but then for channels. Requires UnrealIRCd 6.0.2 or later

Almost all channel modes are modularized
Only the three list modes (+b/+e/+I) are still in the core
The five level modes (+vhoaq) are now also modular. They are all loaded by default but you can blacklist one or more if you don’t want them. For example to disable halfop: blacklist-module chanmodes/halfop;
Support for compiling without PREFIX_AQ has been removed because people often confused it with disabling +a/+q which is something different.

Named extended bans
Extbans now no longer show up with single letters but with names. For example +b ~c:#channel is now +b ~channel:#channel.
Extbans are automatically converted from the old to the new style, both from clients and from/to older UnrealIRCd 5 servers. The auto-conversion also works fine with complex extbans such as +b ~t:5:~q:nick!user@host to +b ~time:5:~quiet:nick!user@host.

New IRCv3 features
MONITOR: an alternative for WATCH to monitor other users (“notify list”).
draft/extended-monitor: extensions for MONITOR, still in draft.
invite-notify: report channel invites to other chanops (or users) in a machine readable way.
setname: notify clients about realname (gecos) changes.

GeoIP lookups can be configured
This shows the country of the user to IRCOps in WHOIS and in the “user connecting” line.
By downstream default, no module is loaded.
Options are the geoip_maxmind and geoip_csv modules.

Configure WHOIS output in a very precise way
You can now decide which fields (e.g. modes, geo, certfp, etc) you want to expose to who (everyone, self, oper).
See set::whois-details for more details.

We now ship with 3 cloaking modules and you need to load 1 explicitly via loadmodule:
cloak_sha256: the recommended module for anyone starting a new network. It uses the SHA256 algorithm under the hood.
cloak_md5: for anyone who is upgrading their network from older UnrealIRCd versions. Use this so your cloaked host bans remain the same.
cloak_none: if you don’t want any cloaking, not even as an option to your users (rare)

Remote includes are now supported everywhere in the config file.
Support for https:// fetching is now always available, even if you don’t compile with libcurl support.
Anywhere an URL is encountered on its own, it will be fetched automatically. This makes it work not only for includes and motd (which was already supported) but also for any other file.
To prevent something from being interpreted as a remote include URL you can use ‘value’ instead of “value”.

Invite notification: set set::normal-user-invite-notification yes; to make chanops receive information about normal users inviting someone to their channel. The name of this setting may change in a later version.
Websocket: you can add a listen::options::websocket::forward 1.2.3.4 option to make unrealircd accept a Forwarded (RFC 7239) header from a reverse proxy connecting from 1.2.3.4 (plans to accept legacy X-Forwarded-For and a proxy password too). This feature is currently experimental.

Changes

TLS cipher and some other information is now visible for remote clients as well, also in [secure: xyz] connect line.
Error messages in remote includes use the url instead of a temporary file
Downgrading from UnrealIRCd 6 is only supported down to 5.2.0 (so not lower like 5.0.x). If this is a problem then make a copy of your db files (e.g.: reputation.db).

Removed

/REHASH -motd and -opermotd are gone, just use /REHASH

Breaking changes

See https://www.unrealircd.org/docs/Upgrading_from_5.x, but in short:

You can use the unrealircd.conf from UnrealIRCd 5, but you need to make a few changes:

You need to add include “snomasks.default.conf”;
You need to load a cloaking module explicitly. Assuming you already have a network then add: loadmodule “cloak_md5”;
The log block(s) need to be updated, use something like:

log {
source {
!debug;
all;
}
destination {
file “ircd.log” { maxsize 100M; }
}
}

Server protocol

When multiple related SJOIN messages are generated for the same channel then we now only send the current channel modes (e.g. +sntk key) in the first SJOIN and not in the other ones as they are unneeded for the immediate followup SJOINs, they waste unnecessary bytes and CPU. Such messages may be generated when syncing a channel that has dozens of users and/or bans/exempts/invexes. Ideally this should not need any changes in other software, since we already supported such messages in the past and code for handling it exists way back to 3.2.x, but you better check to be sure!
If you send PROTOCTL NEXTBANS then you will receive extended bans with Named EXTended BANs instead of letters (e.g.: +b ~account:xyz), otherwise you receive them with letters (e.g.: +b ~a:xyz).
Some ModData of users is (also) communicated in the UID message while syncing using a message tag that only appears in server-to-server traffic, s2s-md/moddataname=value. Thus, data such as operinfo, tls cipher, geoip, certfp, sasl and webirc is communicated at the same time as when a remote connection is added. This makes it that a “connecting from” server notice can include all this information and also so code can make an immediate decission on what to do with the user in hooks. ModData modules need to set mreq.sync = MODDATA_SYNC_EARLY; if they want this. Servers of course need to enable MTAGS in PROTOCTL to see this.
The SLOG command is used to broadcast logging messages. This is done for log::destination remote, as used in doc/conf/snomasks.default.conf, for example for link errors, oper ups, flood messages, etc. It also includes all JSON data in a message tag when PROTOCTL MTAGS is used.
Bounced modes are gone: these were MODEs that started with a & which servers were to act on with reversed logic (add becoming remove and vice versa) and never to send something back to that server. In practice this was almost never used and complicated the code (way) too much.

Client protocol

Extended bans now have names instead of letters. If a client sends the old format with letters (e.g. +b ~a:XYZ) then the server will convert it to the new format with names (e.g.: +b ~account:XYZ)
Support for MONITOR and the other IRCv3 features (see Enhancements)

Read More

unrealircd-6.0.2-1.el8

Read Time:11 Minute, 1 Second

FEDORA-EPEL-2022-c5da356c8d

Packages in this update:

unrealircd-6.0.2-1.el8

Update description:

UnrealIRCd 6.0.2

UnrealIRCd 6.0.2 comes with several nice feature enhancements along with some fixes. It also includes a fix for a crash bug that can be triggered by ordinary users.

Fixes

Fix crash that can be triggered by regular users if you have any deny dcc blocks in the config or any spamfilters with the d (DCC) target.
Fix infinite hang on “Loading IRCd configuration” if DNS is not working. For example if the 1st DNS server in /etc/resolv.conf is down or refusing requests.
Some MODE server-to-server commands were missing a timestamp at the end, even though this is mandatory for modes coming from a server.
The channeldb module now converts letter extbans to named extbans (e.g. ~a to ~account). Previously it did not, which caused letter extbans to appear in the banlist. Later on, when linking servers, this would cause duplicate entries to appear as well, with both the old and new format. The extbans were still effective though, so this is mostly a visual +b/+e/+I list issue.
Some Extended Server Bans were not working correctly for WEBIRC proxies. In particular, a server ban or exempt (ELINE) on ~country:XX was only checked against the WEBIRC proxy.

Enhancements

Support for logging to a channel. Similar to snomasks but then for channels.
Command line interface changes:
The CLI tool now communicates to the running UnrealIRCd process via a UNIX socket to send commands and retrieve output.
The command unrealircdctl rehash will now show the rehash output, including warnings and errors, and return a proper exit code.
The same for unrealircdctl reloadtls
The command unrealircdctl status to show if UnrealIRCd is running, the version, channel and user count, ..
The command unrealircdctl genlinkblock is now documented and is referred to from the Linking servers tutorial.

New option set::server-notice-show-event which can be set to no to hide the event information (e.g. connect.LOCAL_CLIENT_CONNECT) in server notices. This can be overridden per-oper in the Oper block via oper::server-notice-show-event.
Support for IRC over UNIX sockets (on the same machine), if you specify a file in the listen block instead of an ip/port. This probably won’t be used much, but the option is there. Users will show up with a host of localhost and IP 127.0.0.1 to keep things simple.
The MAP command now shows percentages of users
Add WHO option to search clients by time connected (e.g. WHO <300 t to search for less than 300 seconds)
Rate limiting of MODE nick -x and -t via new vhost-flood option in set::anti-flood block.

Changes

Update Russian help.ru.conf.

Protocol

SVSMODE #chan -b nick will now correctly remove extbans that prevent nick from joining. This fixes a bug where it would remove too much (for ~time) or not remove extbans (most other extbans, e.g. ~account). SVSMODE #chan -b has also been fixed accordingly (remove all bans preventing joins). Note that all these commands do not remove bans that do not affect joins, such as ~quiet or ~text.

UnrealIRCd 6.0.1.1

Fixes

In 6.0.1.1: extended bans were not properly synced between U5 and U6. This caused missing extended bans on the U5 side (MODE was working OK, this only happened when linking servers)
Text extbans did not have any effect (+b ~text:censor:*badword*)
Timed bans were not expiring if all servers on the network were on U6
Channel mode +f could place a timed extban with ~t instead of ~time
Crash when unloading any of the vhoaq modules at runtime
Some log messages being wrong (CHGIDENT, CHGNAME)
Remove confusing high cpu load warning

Enhancements

Error on unknown snomask in set::snomask-on-oper and oper::snomask.
TKL add/remove/expire messages now show [duration: 60m] instead of the [expires: ZZZ GMT] string since that is what people are more interested in and is not affected by time zones. The format in all the 3 notices is also consistent now.

UnrealIRCd 6.0.0

Many thanks (by upstream) to k4be for his help during development, other contributors for their feedback and patches, the people who tested the beta’s and release candidates, translators and everyone else who made this release happen!

Summary

UnrealIRCd 6 comes with a completely redone logging system (with optional JSON support), named extended bans, four new IRCv3 features, geoip support and remote includes support built-in.

Additionally, things are more customizable such as what gets sent to which snomask. All the +vhoaq channel modes are now modular as well, handy for admins who don’t want or need halfops or +q/+a. For WHOIS it is now customizable in detail who gets to see what.

A summary of the features is available at What’s new in UnrealIRCd 6. For complete information, continue reading the release notes below. The sections below contain all the details.

Upgrading from UnrealIRCd 5

When upgrading from UnrealIRCd 5 to 6 then you can use your existing configuration and files. There’s no need to start from scratch. However, you will need to make a few updates, see Upgrading from 5.x to 6.x.

Enhancements

Completely new log system and snomasks overhaul
Both logging and snomask sending is done by a single logging function
Support for JSON logging to disk, instead of the default text format. JSON logging adds lot of detail to log messages and consistently expands things like client with properties like hostname, connected_since, reputation, modes, etc.
The JSON data is also sent to all IRCOps who request the unrealircd.org/json-log capability. The data is then sent in a message-tag called unrealircd.org/json-log. This makes it ideal for client scripts and bots to do automated things.
A new style log { } block is used to map what log messages should be logged to disk, and which ones should be sent to snomasks.
The default logging to snomask configuration is in snomasks.default.conf which everyone should include from unrealircd.conf. That is, unless you wish to completely reconfigure which logging goes to which snomasks yourself, which is also an option now.
See Snomasks on the new snomasks – lots of letters changed!
See FAQ: Converting log { } block on how to change your existing log { } blocks for disk logging.
We now have a consistent log format and log messages can be multiline.
Colors are enabled by default in snomask server notices, these can be disabled via set::server-notice-colors and also in oper::server-notice-colors
Support for logging to a channel. Similar to snomasks but then for channels. Requires UnrealIRCd 6.0.2 or later

Almost all channel modes are modularized
Only the three list modes (+b/+e/+I) are still in the core
The five level modes (+vhoaq) are now also modular. They are all loaded by default but you can blacklist one or more if you don’t want them. For example to disable halfop: blacklist-module chanmodes/halfop;
Support for compiling without PREFIX_AQ has been removed because people often confused it with disabling +a/+q which is something different.

Named extended bans
Extbans now no longer show up with single letters but with names. For example +b ~c:#channel is now +b ~channel:#channel.
Extbans are automatically converted from the old to the new style, both from clients and from/to older UnrealIRCd 5 servers. The auto-conversion also works fine with complex extbans such as +b ~t:5:~q:nick!user@host to +b ~time:5:~quiet:nick!user@host.

New IRCv3 features
MONITOR: an alternative for WATCH to monitor other users (“notify list”).
draft/extended-monitor: extensions for MONITOR, still in draft.
invite-notify: report channel invites to other chanops (or users) in a machine readable way.
setname: notify clients about realname (gecos) changes.

GeoIP lookups can be configured
This shows the country of the user to IRCOps in WHOIS and in the “user connecting” line.
By downstream default, no module is loaded.
Options are the geoip_maxmind and geoip_csv modules.

Configure WHOIS output in a very precise way
You can now decide which fields (e.g. modes, geo, certfp, etc) you want to expose to who (everyone, self, oper).
See set::whois-details for more details.

We now ship with 3 cloaking modules and you need to load 1 explicitly via loadmodule:
cloak_sha256: the recommended module for anyone starting a new network. It uses the SHA256 algorithm under the hood.
cloak_md5: for anyone who is upgrading their network from older UnrealIRCd versions. Use this so your cloaked host bans remain the same.
cloak_none: if you don’t want any cloaking, not even as an option to your users (rare)

Remote includes are now supported everywhere in the config file.
Support for https:// fetching is now always available, even if you don’t compile with libcurl support.
Anywhere an URL is encountered on its own, it will be fetched automatically. This makes it work not only for includes and motd (which was already supported) but also for any other file.
To prevent something from being interpreted as a remote include URL you can use ‘value’ instead of “value”.

Invite notification: set set::normal-user-invite-notification yes; to make chanops receive information about normal users inviting someone to their channel. The name of this setting may change in a later version.
Websocket: you can add a listen::options::websocket::forward 1.2.3.4 option to make unrealircd accept a Forwarded (RFC 7239) header from a reverse proxy connecting from 1.2.3.4 (plans to accept legacy X-Forwarded-For and a proxy password too). This feature is currently experimental.

Changes

TLS cipher and some other information is now visible for remote clients as well, also in [secure: xyz] connect line.
Error messages in remote includes use the url instead of a temporary file
Downgrading from UnrealIRCd 6 is only supported down to 5.2.0 (so not lower like 5.0.x). If this is a problem then make a copy of your db files (e.g.: reputation.db).

Removed

/REHASH -motd and -opermotd are gone, just use /REHASH

Breaking changes

See https://www.unrealircd.org/docs/Upgrading_from_5.x, but in short:

You can use the unrealircd.conf from UnrealIRCd 5, but you need to make a few changes:

You need to add include “snomasks.default.conf”;
You need to load a cloaking module explicitly. Assuming you already have a network then add: loadmodule “cloak_md5”;
The log block(s) need to be updated, use something like:

log {
source {
!debug;
all;
}
destination {
file “ircd.log” { maxsize 100M; }
}
}

Server protocol

When multiple related SJOIN messages are generated for the same channel then we now only send the current channel modes (e.g. +sntk key) in the first SJOIN and not in the other ones as they are unneeded for the immediate followup SJOINs, they waste unnecessary bytes and CPU. Such messages may be generated when syncing a channel that has dozens of users and/or bans/exempts/invexes. Ideally this should not need any changes in other software, since we already supported such messages in the past and code for handling it exists way back to 3.2.x, but you better check to be sure!
If you send PROTOCTL NEXTBANS then you will receive extended bans with Named EXTended BANs instead of letters (e.g.: +b ~account:xyz), otherwise you receive them with letters (e.g.: +b ~a:xyz).
Some ModData of users is (also) communicated in the UID message while syncing using a message tag that only appears in server-to-server traffic, s2s-md/moddataname=value. Thus, data such as operinfo, tls cipher, geoip, certfp, sasl and webirc is communicated at the same time as when a remote connection is added. This makes it that a “connecting from” server notice can include all this information and also so code can make an immediate decission on what to do with the user in hooks. ModData modules need to set mreq.sync = MODDATA_SYNC_EARLY; if they want this. Servers of course need to enable MTAGS in PROTOCTL to see this.
The SLOG command is used to broadcast logging messages. This is done for log::destination remote, as used in doc/conf/snomasks.default.conf, for example for link errors, oper ups, flood messages, etc. It also includes all JSON data in a message tag when PROTOCTL MTAGS is used.
Bounced modes are gone: these were MODEs that started with a & which servers were to act on with reversed logic (add becoming remove and vice versa) and never to send something back to that server. In practice this was almost never used and complicated the code (way) too much.

Client protocol

Extended bans now have names instead of letters. If a client sends the old format with letters (e.g. +b ~a:XYZ) then the server will convert it to the new format with names (e.g.: +b ~account:XYZ)
Support for MONITOR and the other IRCv3 features (see Enhancements)

Read More

unrealircd-6.0.2-1.el9

Read Time:2 Minute, 42 Second

FEDORA-EPEL-2022-0963d0e76e

Packages in this update:

unrealircd-6.0.2-1.el9

Update description:

UnrealIRCd 6.0.2

UnrealIRCd 6.0.2 comes with several nice feature enhancements along with some fixes. It also includes a fix for a crash bug that can be triggered by ordinary users.

Fixes

Fix crash that can be triggered by regular users if you have any deny dcc blocks in the config or any spamfilters with the d (DCC) target.
Fix infinite hang on “Loading IRCd configuration” if DNS is not working. For example if the 1st DNS server in /etc/resolv.conf is down or refusing requests.
Some MODE server-to-server commands were missing a timestamp at the end, even though this is mandatory for modes coming from a server.
The channeldb module now converts letter extbans to named extbans (e.g. ~a to ~account). Previously it did not, which caused letter extbans to appear in the banlist. Later on, when linking servers, this would cause duplicate entries to appear as well, with both the old and new format. The extbans were still effective though, so this is mostly a visual +b/+e/+I list issue.
Some Extended Server Bans were not working correctly for WEBIRC proxies. In particular, a server ban or exempt (ELINE) on ~country:XX was only checked against the WEBIRC proxy.

Enhancements

Support for logging to a channel. Similar to snomasks but then for channels.
Command line interface changes:
The CLI tool now communicates to the running UnrealIRCd process via a UNIX socket to send commands and retrieve output.
The command unrealircdctl rehash will now show the rehash output, including warnings and errors, and return a proper exit code.
The same for unrealircdctl reloadtls
The command unrealircdctl status to show if UnrealIRCd is running, the version, channel and user count, ..
The command unrealircdctl genlinkblock is now documented and is referred to from the Linking servers tutorial.

New option set::server-notice-show-event which can be set to no to hide the event information (e.g. connect.LOCAL_CLIENT_CONNECT) in server notices. This can be overridden per-oper in the Oper block via oper::server-notice-show-event.
Support for IRC over UNIX sockets (on the same machine), if you specify a file in the listen block instead of an ip/port. This probably won’t be used much, but the option is there. Users will show up with a host of localhost and IP 127.0.0.1 to keep things simple.
The MAP command now shows percentages of users
Add WHO option to search clients by time connected (e.g. WHO <300 t to search for less than 300 seconds)
Rate limiting of MODE nick -x and -t via new vhost-flood option in set::anti-flood block.

Changes

Update Russian help.ru.conf.

Protocol

SVSMODE #chan -b nick will now correctly remove extbans that prevent nick from joining. This fixes a bug where it would remove too much (for ~time) or not remove extbans (most other extbans, e.g. ~account). SVSMODE #chan -b has also been fixed accordingly (remove all bans preventing joins). Note that all these commands do not remove bans that do not affect joins, such as ~quiet or ~text.

Read More

unrealircd-6.0.2-1.fc36

Read Time:2 Minute, 42 Second

FEDORA-2022-0bff4ccd3b

Packages in this update:

unrealircd-6.0.2-1.fc36

Update description:

UnrealIRCd 6.0.2

UnrealIRCd 6.0.2 comes with several nice feature enhancements along with some fixes. It also includes a fix for a crash bug that can be triggered by ordinary users.

Fixes

Fix crash that can be triggered by regular users if you have any deny dcc blocks in the config or any spamfilters with the d (DCC) target.
Fix infinite hang on “Loading IRCd configuration” if DNS is not working. For example if the 1st DNS server in /etc/resolv.conf is down or refusing requests.
Some MODE server-to-server commands were missing a timestamp at the end, even though this is mandatory for modes coming from a server.
The channeldb module now converts letter extbans to named extbans (e.g. ~a to ~account). Previously it did not, which caused letter extbans to appear in the banlist. Later on, when linking servers, this would cause duplicate entries to appear as well, with both the old and new format. The extbans were still effective though, so this is mostly a visual +b/+e/+I list issue.
Some Extended Server Bans were not working correctly for WEBIRC proxies. In particular, a server ban or exempt (ELINE) on ~country:XX was only checked against the WEBIRC proxy.

Enhancements

Support for logging to a channel. Similar to snomasks but then for channels.
Command line interface changes:
The CLI tool now communicates to the running UnrealIRCd process via a UNIX socket to send commands and retrieve output.
The command unrealircdctl rehash will now show the rehash output, including warnings and errors, and return a proper exit code.
The same for unrealircdctl reloadtls
The command unrealircdctl status to show if UnrealIRCd is running, the version, channel and user count, ..
The command unrealircdctl genlinkblock is now documented and is referred to from the Linking servers tutorial.

New option set::server-notice-show-event which can be set to no to hide the event information (e.g. connect.LOCAL_CLIENT_CONNECT) in server notices. This can be overridden per-oper in the Oper block via oper::server-notice-show-event.
Support for IRC over UNIX sockets (on the same machine), if you specify a file in the listen block instead of an ip/port. This probably won’t be used much, but the option is there. Users will show up with a host of localhost and IP 127.0.0.1 to keep things simple.
The MAP command now shows percentages of users
Add WHO option to search clients by time connected (e.g. WHO <300 t to search for less than 300 seconds)
Rate limiting of MODE nick -x and -t via new vhost-flood option in set::anti-flood block.

Changes

Update Russian help.ru.conf.

Protocol

SVSMODE #chan -b nick will now correctly remove extbans that prevent nick from joining. This fixes a bug where it would remove too much (for ~time) or not remove extbans (most other extbans, e.g. ~account). SVSMODE #chan -b has also been fixed accordingly (remove all bans preventing joins). Note that all these commands do not remove bans that do not affect joins, such as ~quiet or ~text.

Read More

Drupal core – Moderately critical – Third-party libraries – SA-CORE-2022-006

Read Time:1 Minute, 10 Second
Project: 
Date: 
2022-March-21
Vulnerability: 
Third-party libraries
CVE IDs: 
CVE-2022-24775
Description: 

Drupal uses the third-party Guzzle library for handling HTTP requests and responses to external services. Guzzle has released a security update which may affect some Drupal sites.

We are issuing this security advisory outside our regular Drupal security release window schedule since Guzzle has already published information about the vulnerability, and vulnerabilities might exist with core, contributed modules, or custom modules that use Guzzle for outgoing requests. Guzzle has rated this vulnerability as low-risk.

This advisory is not covered by Drupal Steward.

Solution: 

Install the latest version:

If you are using Drupal 9.3, update to Drupal 9.3.9.
If you are using Drupal 9.2, update to Drupal 9.2.16.

All versions of Drupal 9 prior to 9.2.x are end-of-life and do not receive security coverage. Note that Drupal 8 has reached its end of life.

Drupal 7 is not affected.

Reported By: 
Jeroen Tubex
Damien McKenna of the Drupal Security Team
Fixed By: 
xjm of the Drupal Security Team
Alex Pott of the Drupal Security Team
Lee Rowlands of the Drupal Security Team
Greg Knaddison of the Drupal Security Team
Peter Wolanin of the Drupal Security Team

Read More

CVE-2021-25019

Read Time:11 Second

The SEO Plugin by Squirrly SEO WordPress plugin before 11.1.12 does not escape the type parameter before outputting it back in an attribute in an admin page, leading to a Reflected Cross-Site Scripting

Read More

CVE-2021-24905

Read Time:24 Second

The Advanced Contact form 7 DB WordPress plugin before 1.8.7 does not have authorisation nor CSRF checks in the acf7_db_edit_scr_file_delete AJAX action, and does not validate the file to be deleted, allowing any authenticated user to delete arbitrary files on the web server. For example, removing the wp-config.php allows attackers to trigger WordPress setup again, gain administrator privileges and execute arbitrary code or display arbitrary content to the users.

Read More

Open-Xchange Security Advisory 2022-03-21

Read Time:22 Second

Posted by Martin Heiland via Fulldisclosure on Mar 21

Dear subscribers,

we’re sharing our latest advisory with you and like to thank everyone who contributed in finding and solving those
vulnerabilities. Feel free to join our bug bounty programs for OX AppSuite, Dovecot and PowerDNS at HackerOne.

Yours sincerely,
Martin Heiland, Open-Xchange GmbH

Product: OX App Suite
Vendor: OX Software GmbH

Internal reference: OXUIB-1092
Vulnerability type: Cross-Site Scripting (CWE-80)
Vulnerable…

Read More